[GLLUG] own hardware for fibre internet via Comunity Fibre

[MJ]

Dear GLUG members,

I do not have friends with electrical engineering background nor time to do long search and/or register with another 
bulletin board, do not want to ask artificial so called intelligence for advise, so I come here.
Being a personality who rarely does not turn over every stone before I make a decision, I do not have a clues if there 
are any other stones I should be unaware of. Speaking in metaphor. I hope you would not mind.

Having now opportunity to connect to 1gb synchronous fibre I'd like to use my own router again since IPCop ended. 
I have decided not to use Nokia-ONT G-010G-Q Optical Fibre GPON Terminal, as in this way I can locate all the 
hardware in a dedicated space and I remove another media bridge becoming potential point of failure. I just need 
to neatly run 10 metre long fibre cable without any sharp bends from the 
fibre wall entry location to 
G-010S-A MA5671A Cat Stick 2.5G Optical Cat G-P-O-N Protocol
inserted to
Banana Pi BPI-R4 high-performance development board, supporting 2 SFPs

In this way I have upgrade option of 2 x 10G SFP WAN interfaces.
Let me know if my logic falter anywhere. 
With Thanks in advance.
-- 
MJ
==========================================================
"AND IF YOU TOLERATE THIS, YOUR CHILDREN WILL BE NEXT" -- MSP
==========================================================