[Herefordshire] IPcop troubles

[Julian Robbins]

Hi Noel

Yes you do need a driver. Its fairly simple though. The web gui of IPCop 
should give you a link to where to get it. Download and upload thru the 
GUI. It will be a .o file as its is a driver.

 From the Web GUI:-


> To utilise the Speedtouch 330 or Speedtouch USB modem you must upload the firmware to your IPCop box. Please download the Embedded Firmware package for SpeedTouch 330 from speedtouch.com, unzip and then upload the appropriate file for your modem : KQD6_3.xxx when Rev<4 or ZZZL_3.xxx for Rev=4 using the form below.
> URL: http://www.speedtouch.com/support.htm
> Modem: Rev Connect the modem

Are u using 1.4 ? It may have the driver in already, so check that you 
are using the 1.4 docs. 1.3 is quite different in places.

Give me a ring, as I have used IPCop a lot now and will probably be able 
to help you.

Julian

Noel McG. wrote:
> Hello Julian,
> 
> I hope to be having another go at this later on today.  This is part of it
> ipcop extra instructions for the ISP/modem I now have.
> 
>   "  Q.Will my SpeedTouch 330 [http://www.speedtouchdsl.com/prod330.htm] USB
> ADSL modem work with IPCop?
> A. Yes. Many ISPs, including Freeserve in the UK, provide it for their
> Broadband service. Upload the mgmt.o file
> to IPCop, and on the PPP Setup page set the VPI Number to 0, and the VCI
> Number to 38 if you are in the UK.  "
> 
> Does the file mgmt.o ring any bells with you?  I did a Google for it and
> came up with a link but it seemed to be a set of drivers.  I take it that I
> need to load this through the browser in some way?
> 
> Might well be rining you later this evening!
> 
> Noel.