[Sderby] Monitor problems

[stuart.marshall4]

Hi some monitors had spark gaps and they get fluff in them which leads to
sparking the other cause is the solder on HT line melts and runs off the
joint this is on the main board at the bottom of the monitor most times but
have just fixed a dell monitor and it was on the board that plugs onto the
tube. you do have to unsolder screening cans and things.
Stuart
----- Original Message -----
From: "Ashley Heath" <ashley.heath at bigfoot.com>
To: <sderby at mailman.lug.org.uk>
Sent: Tuesday, September 30, 2003 2:39 PM
Subject: [Sderby] Monitor problems


>
> My monitor has just started playing up, it started with the occasional
display reset as if the power was quickly being turned off and back on, this
probably happened 3-4 times over the past week. Now it has started doing
this every few seconds, each time with a clicking sound like a whip cracking
and the display resetting several times.
>
> Does anyone know what may be causing this?
> Any help appreciated.
> Thanks
> Ash
>
>
>
> _______________________________________________
> Sderby mailing list
> Sderby at mailman.lug.org.uk
> http://mailman.lug.org.uk/mailman/listinfo/sderby
> Web site: http://sderby.lug.org.uk/
> wiki: http://www.sderby.lug.org.uk/cgi-bin/wiki.pl
> Join us on IRC: irc.lug.org.uk #sderby