[SWLUG] More info on XP Pro - SME problem

Rhys Sage rhys_sage at yahoo.com
Fri Feb 20 22:10:47 UTC 2004


I can still only use Internet Explorer to ftp my
server. I cannot do anything else with it.
I can access via putty and ping but that's about all -
except from httping the server manager page.

Well, I added 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\netlogon\parameters]
"RequireSignOrSeal"=dword:00000000
to the registry but I still cannot map the network
drive. It still tells me it's not there. I tried
pinging zeus and it worked. These are the new ping and
ipconfig logs
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Admin>ping zeus

Pinging zeus [192.168.40.10] with 32 bytes of data:

Reply from 192.168.40.10: bytes=32 time<1ms TTL=64
Reply from 192.168.40.10: bytes=32 time<1ms TTL=64
Reply from 192.168.40.10: bytes=32 time<1ms TTL=64
Reply from 192.168.40.10: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.40.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Documents and Settings\Admin>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.40.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.40.10

C:\Documents and Settings\Admin> 

if config on zeus brings up

login as: root
root at zeus's password:
Last login: Fri Feb 20 17:01:23 2004 from pc-00011
Welcome to the Mitel Networks SME Server.
[root at zeus root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:01:02:A5:2B:5F
inet addr:192.168.40.10 Bcast:192.168.40.255
Mask:255.255.255.0
EtherTalk Phase 2 addr:65280/139
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3980 errors:0 dropped:0 overruns:0 frame:0
TX packets:5283 errors:0 dropped:0 overruns:0
carrier:0
collisions:0
RX bytes:288311 (281.5 Kb) TX bytes:5329638 (5.0 Mb)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
EtherTalk Phase 2 addr:0/0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:471 (471.0 b) TX bytes:471 (471.0 b)

sl0 Link encap:Serial Line IP
inet addr:192.168.40.10 P-t-P:0.0.0.0
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1856 errors:0 dropped:0 overruns:0
carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:127491 (124.5 Kb)

[root at zeus root]#


Zeus is set up to permit only access from
192.168.40.11
192.168.40.12
192.168.40.13
192.168.40.14


Zeus will only map a network drive to 98 and to NT. XP
rejects it as unknown.

All the systems run Outpost. Outpost is setup
identically on all system, allowing access from
192.168.40.xx

Any suggestions?

Rhys


	
	
		
___________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping" 
your friends today! Download Messenger Now 
http://uk.messenger.yahoo.com/download/index.html




More information about the Swlug mailing list