[Wolves] Strange graphics problem

[Mark R. Trotman]

Kevanf1 wrote:
> I have just come across a very strange graphics problem.  I've
> upgraded my graphics card from an old 3dfx Voodoo Banshee with 16mb of
> RAM to a NVidia 64mb GeForce - FX400  It has installed ok and been
> registered in my SuSE box.  But, the damn resolution is wrong :-(  Sax
> is reporting it as 1024x768 which is what I normally run at and am
> happy with.  However, it most certainly is not this resolution and
> Control Centre is correctly reporting it as being 800x600.  There is
> no higher resolution available in Control Centre.  Which is ridiculous
> because the card can handle it as can the monitor - it's what I ran
> before on the old graphics card.  It's made worse by the fact that it
> started up ok at 1024x768 and only dropped down when I put the colour
> depth at 24 bit.  Again, my normal mode.  I have tried taking colour
> depth back to 16 bit to no avail.
> 
> Any ideas?  NVidia drivers are installed.

Using a similar card here without the issues you speak of. Can't you set 
the res. in Xconfigurator or something... (long time I did anything like 
that!) Sorry to be of absolutely no use at all ;)

Good luck!

-- 

Mark