[Wolves] Need to put a thread on a 1/8" motor shafts

[Alex Willmer]

On 28 October 2012 12:21, Kevanf1 <kevanf1 at gmail.com> wrote:
> Sorry Alex I only have a small selection of taps but no dies.  You say
> imperial?  Which imperial thread?  BSP,  BSF, UNC, UNF, Whit there are
> others :(

UNC, I think - child of the metric generation. Basically whichever is
the most common, or that I can get a nylon lock nuts of.

-- 
Alex Willmer <alex at moreati.org.uk>
http://twitter.com/moreati