[Wylug-discuss] Manual IPv6 on Fedora Core 6
Kevin Barrass
K.J.Barrass at leeds.ac.uk
Wed Nov 14 06:41:51 GMT 2007
Hi
Added the line "IPV6INIT=yes" from your example below and it now works
fine not sure why this line was missing. It now works with a static and
auto alocated global address.
Regards
Kev
-----Original Message-----
From: Jim Jackson [mailto:jj at franjam.org.uk]
Sent: 13 November 2007 16:09
To: Kevin Barrass
Cc: WYLUG
Subject: Re: [Wylug-discuss] Manual IPv6 on Fedora Core 6
Kevin,
On Tue, 13 Nov 2007, Kevin Barrass wrote:
> I am having trouble assigning a static/Manual IPv6 address on a PC
> running Fedora Core 6 with ALL latest patches applied.
> In /etc/sysconfig/networking/devices/ifcfg-eth0 I have the below:
>
> DEVICE=eth0
> BROADCAST=x.x.x.x
> HWADDR=xx:xx:xx:xx:xx:xx
> IPADDR=x.x.x.x
> IPV6ADDR=xxxx:xxxx:xxxx:2::6/64
> IPV6PREFIX=64
> NETMASK=255.255.255.248
> NETWORK=x.x.x.x
> ONBOOT=YES
> GATEWAY=x.x.x.x
> TYPE=Ethernet
>
> Running ifconfig eth0 shows that the Global IPv6 address assigned on
> the interface is an auto configured one not the one configured above.
>
> Has anyone had any experience doing this and had the same problem.
> Also I noticed there is nowhere during the fedora installation to
> configure an IPv6 default gateway, on Linux are you assumed to rely on
> router advertisements for the default gateway.
on a working statically configured Fedora box....
/etc/sysconfig/networking/devices/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:13:72:93:7B:47
ONBOOT=yes
IPV6INIT=yes
IPV6ADDR=2001:630:62:59::80/64
/sbin/ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:13:72:93:7B:47
inet addr:129.11.59.52 Bcast:129.11.59.255
Mask:255.255.255.0
inet6 addr: 2001:630:62:59:213:72ff:fe93:7b47/64 Scope:Global
inet6 addr: fe80::213:72ff:fe93:7b47/64 Scope:Link
inet6 addr: 2001:630:62:59::80/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:745029 errors:0 dropped:0 overruns:0 frame:0
TX packets:742173 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:112373305 (107.1 MiB) TX bytes:85041094 (81.1 MiB)
Interrupt:16
notice the autoconf address as well as the statically assigned one.
More information about the Wylug-discuss
mailing list