[Wylug-help] IP settings/basic help

[Stephen Patterson]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Roger Greenwood wrote:
> To clarify, I have a small 16 port 10MB/s hub, to which are connected 2 x 
> linux machines and 1 router. All fixed IP addresses 192.168.0.1   .2   .7
> 
> My laptop can connect to the hub if a take the cable from the router/hub, and 
> plug it router/laptop.
> 
> My laptop can also connect wireless to the hub, and I can log in to the hub to 
> change settings etc.

Is the cable to your wireless router connected to the internal or
external interface(s) of the router?

I have a rather similar (working) setup, 2 PCs plugged into a switch
with a second cable from the switch to one of the internal ports on the
router (i.e. not the one marked ADSL/cable modem). The router's
configured for the same IP range & netmask on the internal interface.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: GnuPT 2.7.2

iD8DBQFDdzZvUKIGN+Po6XQRAt7fAJ4m99lUWPvOjFECb9xbfGFWxOFZ6ACfXxTM
kmvhGDKeOgv/7KrSdfvF2Y8=
=ZJuf
-----END PGP SIGNATURE-----