[WYLUG-help] "lost" hdd

Thu Jan 26 20:37:42 GMT 2006

Seems the extracts from my dmesg output have got lost somewhere
en-route, so here is the full output in all its glory:

Linux version 2.4.27-2-386 (horms at tabatha.lab.ultramonkey.org) (gcc
version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000015ff0000 (usable)
 BIOS-e820: 0000000015ff0000 - 0000000015ff3000 (ACPI NVS)
 BIOS-e820: 0000000015ff3000 - 0000000016000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
351MB LOWMEM available.
On node 0 totalpages: 90096
zone(0): 4096 pages.
zone(1): 86000 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hdb1 ro 
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 300.690 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 599.65 BogoMIPS
Memory: 350500k/360384k available (1069k kernel code, 9496k reserved,
459k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 300.6932 MHz.
..... host bus clock speed is 66.8206 MHz.
cpu: 0, clocks: 668206, slice: 334103
CPU0<T0:668192,T1:334080,D:9,S:334103,C:668206>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info at itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk... |/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ide: late registration of driver.
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
hdb: ExcelStor Technology J680, ATA DISK drive
blk: queue d6825b60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue d6825c9c, I/O limit 4095Mb (mask 0xffffffff)
hdd: FX54++W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=79656/16/63,
UDMA(33)
hdb: attached ide-disk driver.
hdb: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=10011/255/63,
UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [4998/255/63] p1 p2 < p5 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 1052216k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Real Time Clock Driver v1.10f
hdd: attached ide-cdrom driver.
hdd: ATAPI 54X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 291M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xd0000000
sis900.c: v1.08.07 11/02/2003
PCI: Found IRQ 10 for device 00:12.0
PCI: Sharing IRQ 10 with 00:07.2
00:12.0: SiS 900 Internal MII PHY transceiver found at address 1.
00:12.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 10, 00:06:4f:09:e4:52.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
cmpci: version $Revision: 6.16 $ time 16:51:35 May 16 2005
PCI: Found IRQ 5 for device 00:11.0
cmpci: found CM8738 adapter at io 0xe400 irq 5
cmpci: chip version = 037
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:52:03 May 16 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:12.0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
eth0: Media Link On 100mbps full-duplex 
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
NET4: AppleTalk 0.18a for Linux NET4.0

Many thanks.

Mike
-- 
"Documentation is like sex: when it is good, it is very, very good; and
when it is bad, it is better than nothing."
-- Dick Brandon