[Wylug-help] setting up server
Scott Hodgson
linux at sh2515.plus.com
Mon Jun 16 18:11:13 BST 2008
ROBERTS, Mike wrote:
>
>> What do I need to to setup a file sharing server on my network
>> (localnetwork).
>> I have an old server and I have installed Ubuntu 8.04 Hardy
>> Heron, not
>> the server edition as I am not competent with command line.
>> I want to
>> setup /home folders for users on the server and a shared
>> music folder so
>> we are not using large amounts of hard drive space. also later on a
>> mailserver for pop3 accounts. I have looked around and can't
>> figure out
>> what I need for this purpose. Also can you recommend good
>> sites to get
>> a tutorial on setting it up please.
>> So far I think I need openssh samba and NFS.
>>
>
> Hi,
>
> I have just been through a similar process. I decided* to go for the
> server addition of Ubuntu 8.04 with an add-on called "Webmin". This
> gives you a web based front end you can administer the server with from
> any other PC on your network. The server then doesnt need a screen or
> keyboard hooked up to it and you get a decent web based gui front end to
> all the tricky command line stuff on the server.
>
> Webmin also has quite a lot of online help files which I am ploughing
> through at the moment.
>
> Webmin is here http://www.webmin.com/. I dont have to hand the exact
> instructions I used to install webmin but a quick google for "webmin"
> and "ubuntu 8.04" should point you in the right direction. If I remember
> rightly it only took a few lines of commands at the command line to get
> it installed and set up. Then it was off to a webbrowser on my desktop
> PC to get things configured.
>
> Webmin should take most of the pain out of all the user creating, samba
> setting up, email server and it also caters, it would seem, for just
> about any server type add on module you could think of.
>
> I mentioned my trying it out to one of the guys at my local LUG
> (hertslug) and he said it was very good and he would be lost at work
> with out it where he uses it all the time.
>
> These is another centos based linux distribution you could also use for
> this kind of server setup. It is called SME server
> http://www.smeserver.org/ this a ready to go out of the box server with
> built in web based front end. You just install it, follow the on screen
> prompts then point a web browser on another machine on the network at
> the url the installer gives you and away you go.
>
>
> Hope this helps
>
> Regards Mike
>
> --
>
> The views expressed in this email are those of the correspondent
> and are not those of his employer.
> *****************************************************************
> Mike Roberts -=*=- Design Engineer -=*=- Astrium Limited
> -=FREQUENCY CONTROL PRODUCT GROUP=-
>
> * I tried to use SME server but was installing to a Compaq DL360 which
> needs some system / bios type files installing to the MBR and first
> partition of the machines HDD. SME server has no facility at all (that I
> could find) to configure where to install itself other than effectively
> wiping whatever is already on the disk off and starting afresh. So I
> went for Ubuntu as I was able to save the setup/diagnostics/bios files
> and install the OS where I needed to.
>
> This email (including any attachments) may contain confidential and/or
> privileged information or information otherwise protected from disclosure.
> If you are not the intended recipient, please notify the sender
> immediately, do not copy this message or any attachments and do not use it
> for any purpose or disclose its content to any person, but delete this
> message and any attachments from your system. Astrium disclaims any and all
> liability if this email transmission was virus corrupted, altered or
> falsified.
> ---------------------------------------------------------------------
> Astrium Limited, Registered in England and Wales No. 2449259
> REGISTERED OFFICE:-
> Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
>
>
Hi
Thanks for the link, it does look rather good, so I will install server
edition and try it out.
Scott
More information about the Wylug-help
mailing list