[Hudlug] New mobo wanted!

[Chris Lindley]

On Sat, 2002-11-16 at 19:21, scotgateorg.chris.lindley@ukservers.net
wrote:
Hi,

just to answer my own email which was one of the ones that never got
sent to the list due to moderating holdups!

It wasnt; my mobo that was at fault, btu an incorrectly terminated scsi
bus which had been like this for over 2 years!

I solved it by moving all my SCSi II devices to a separate SCSI host
adaptor, and moving the position of the active terminator on my SCSI U2W
bus!

Cheers
Chris



> HI all,
> 
> I've come to the conclusion that my problems with installing gentoo are not 
> due to my own incompetence, nor faulty memory sockets as I previously 
> stated, but my mobo is kaput!
> 
> I keep getting some non-boots.  i.e. POST does not beep, and usually I need 
> to reset the bios in order to let the macheine boot.  There's a shedload of 
> other stuff as well.
> 
> IN compiling Gentoo I keep getting random errors, which I can only attribute 
> to faulty hardware.
> 
> So it's either the cpu or mobo.!
> 
> At the moment it's a duron 750 with an Abit KT7a133 board.
> 
> Can any body recommend a good board?
> 
> I'd prefer to stay with my sdram, so no DDR only boards.
> 
> I'd also prefer to stick with AMD, since I may not be able to afford to 
> upgrade the cpu as well!
> 
> So advice please!!
> 
> Cheers
> Chris
> 
> 
> 
> _______________________________________________
> Hudlug mailing list
> Hudlug@mailman.lug.org.uk
> http://mailman.lug.org.uk/mailman/listinfo/hudlug
-- 
  Chris Lindley
  chris.lindley@scotgate.org          chrishl@bmb.leeds.ac.uk
  ICQ#157144010     AIM#fergycool    jabber#fergy    IRC#Ferg
  Climb up it, kayak down it + make sure it runs on GNU/Linux