[Gllug] Monitor repair

[Jackson, Harry]

> -----Original Message-----
> From: Chris Bell [mailto:chrisbell at overview.demon.co.uk]
> in the past, but many multilayer boards are used now, 
> expensive specialist
> surface mount repair equipment is often required, and it is 
> getting almost
> impossible to obtain spares.

I got to do the PACE pcb repair course three times in my last job and it
involved microscopes fume extractors and all sort of dodgy looking equipment
all required to work on todays boards. If you have the time and equipment
fixing these things is not too hard but rebuilding a hole in a five layer
board would take a long time. 

Harry


*************************************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. +44 20 7390 3900

This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or 
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message.  Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
*************************************************************************************


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug