[Gllug] Setup ADSL to home network

Jackson, Harry HJackson at colt-telecom.com
Thu May 30 15:02:12 UTC 2002



> -----Original Message-----
> From: Andy McGarty [mailto:andy at mcGarty.net]
> 
> Go for a modem with an ethernet port and save the hassles of 
> USB.  Your
> firewall will then have two nics, one to the modem and the 
> other to your
> hub/home network.

I am planning on doing something similar. I have an old 10mb card that I can
use to the Router and the other nic will be on the safe side. Not sure how
to set this up but I am sure I will figure it out after a few days head
scratching. The Router I am going for has got the trappings of NAT and ip
filtering but i want to do it at the gateway to get a better understanding
of iptables.

> 
> I'd suggest the conexant AMX-CA61E available from Dabs (as their own
> 'dabsvalue' brand) for £66.  Quicklinx 17P7WS and they even 
> have them in
> stock for once.  Or get the four port version (though this 
> would require
> firewalling on all the machines) for £75.

I think someone else is going for a Conexant from dabs that has a firewall. 
> 
> Its very easy to set up.  If you do go for this then drop a 
> shout back to
> the list (or directly) and I'll give you the links I had.  
> You config it
> through a browser and need to change about 5 settings to get 
> it working.

We will see if its easy or not. The immortal phrase "its a piece of cake"
has been rigorously burned from my phrase book.


Harry


*************************************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. +44 20 7390 3900

This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or 
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message.  Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
*************************************************************************************



-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug




More information about the GLLUG mailing list