[Gllug] serial trigger level

[Chris Bell]

On Wed 03 Dec, t.clarke wrote:
> 
> I am speaking totally from memory, but I though 'setserial' or at least some
> other command allowed you to change the trigger level without recompiling
> the kernel.    Alternatively, it might have been some frig that modded a
> flag in the kernel to take effect on reboot.
> Sorry, not very helpful, but if I find anything later and no-one else
> has come up with anything I will re-post.
> 
> What CPU are you using ?  - anything half decent should not be dropping
> serial interrupts unless you are hammering it to death !!
> 
> Tim
> 
   Are you having problems caused by different earths, or low signal levels?
You could try a ferrite common mode filter that clips round the cable, or a
few turns through a larger ferrite core (I use the core from an old TV line
output transformer), otherwise optical isolators or pulse transformers.

-- 
Chris Bell


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug