[HLUG] AverMedia TV card problem in openSuSE10.3

[dusty]

Hey Emon,

Here are some links I recommend you read:-

http://ubuntuforums.org/showthread.php?t=587056&page=2
http://www.linuxforums.org/forum/suse-linux-help/112495-avermedia-tv-card-not-working-under-suse10-3-a.html
http://www.linuxtv.org/pipermail/linux-dvb/2007-August/019781.html
https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/177583
http://whirlpool.net.au/forum-replies-archive.cfm/775937.html
http://www.tv-cards.com/messageboard/viewforum.php?id=36

and go through these:-
http://www.google.co.uk/search?q=AVerTV+Super+007%2Blinux&hl=en&start=10&sa=N

Hope this helps, good luck!

Regards,

Dusty.

dusty wrote:
> Hey Emon,
>
> I am in the process of getting a tuner tv card working (which is at 
> the moment semi-working) and a DVB-T USB tuner box under ubuntu.
>
> The tuner card was recognized in a fedora box auto magically but not 
> in my ubuntu, i loaded the correct module for it (Googled) and then 
> installed 'tvtime' package from the ubuntu repositories.  I stuck my 
> DVB-T mini antenna into the tv antenna slot and bam it got a few 
> channels straight away.
>
> My tuner card is a Lifeview different to yours, but if yours was 
> detected, I suggest a Google because it must obviously be supported 
> under linux.
>
> Also try the tvtime program, i've found my card won't work in certain 
> apps but in others it does.  I've had great success with tvtime.
>
> Regards,
>
> Dusty.
>
> Emon wrote:
>> Hi everone
>>
>> I have just installed a "AVer TV Super 007" card from AverMedia but when
>> I try to Scan for channels using KDETV it can't find any channel. In
>> YaST it shows up under "Hardware" -> "TV Card" as "SAA7133/SAA7135 Video
>> Broadcast Decoder" but when I try to scan channels from there it says
>>
>> *********************
>> device has no tuner, exiting
>> Number of TV Stations Found: 0
>> *********************
>>
>> So someone at my local lug suggested to do this; he says he found the
>> solution at some suse forum but can't remember which one  :-(
>>
>> **************************
>> "In suse you have to enter the needed values with Yast:
>> hardware->TV card -> Edit -> Expert settings
>> set Module parameters
>> card 57
>> gbuffers 2
>> tuner 54"
>>
>> **************************
>>
>> Now I am getting video, but no audio!!
>>
>> Any suggestions??
>>
>> Thanks in advance
>> Emon
>>
>>
>>   
>
>